Extremely versatile complete package - your powerful all-in-one solar solution with high-quality premium components for maximum energy independence
The Premium Series is a true all-rounder offering unbeatable value for money. Besides its use as a UPS backup solution with a choice between grid and battery priority, this PV system is equally well-suited for self-consumption. There are virtually no limits to the performance of this solar system – depending on individual needs and upon request, battery expansions are possible. If a higher output power is required from the inverter, additional identical units can be connected to increase performance.
In addition to the power electronics, the storage unit, and the cables required to connect the necessary components, the complete set is also included. Depending on your selection, the complete set will be delivered with or without an electricity meter. The system will not be shipped pre-configured.
Parts list – what's included:
3x Victron Energy 48/5000 MultiPlus-II Inverters
Victron Energy SmartSolar MPPT RS 450/200-MC4 48V charge controller
10 x 3.5kWh LiFePo4 battery modules with integrated BMS
Inverter connection cable for connecting the batteries to the MultiPlus 48/5000 (2m)
VE.Can to CAN-Bus BMS Type A cable 1.8m 1.8m ASS030720018 for connecting the Cerbo GX to the memory
3m Victron RJ45 UTP cable for connecting the MultiPlus to the Cerbo GX
Victron Energy's Cerbo GX MK2 + GX Touch 50 – the communication hub of your system
1m battery cable 25mm² M8 terminal to screw terminal connection for connecting the charge controller to the battery
1m battery cable 50mm² with M8 eyelets on both ends for connecting Multiplus and Lynx distributor
Victron 3m VE.Direct cable connection cable for connecting the charge controller to the Cerbo GX
2x 5-pack MEGA fuse 125A 70V for 48V systems
1x 5-pack MEGA fuse 250A 70V for 48V systems
When selecting electricity meter:
1x Victron VM-3P75CT Energy Meter
1x Victron 5m RJ45 UTP cable
Enhanced use of your HomePremium system
The HomePremium system is supplied optionally with or without a Victron electricity meter and cable, although an energy meter with a connection cable is mandatory for the setup of an Energy Storage System.
This electricity meter allows you to install it in parallel with the grid and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This makes seamless integration of decentralized energy sources and consumers into the existing power grid no problem.
Our storage battery is a state-of-the-art lithium iron phosphate battery, offering maximum safety and lifespan. Each module features a battery management system (BMS) for comprehensive protection against deep discharge, overcharging, and damage from high currents or extreme temperatures. Short circuits and reverse polarity are also prevented.
Features of memory modules:
Extremely cycle-resistant – over 6000 cycles at 95% DoD (discharge per cycle)
Absolutely intrinsically safe thanks to integrated protective shutdown (BMS)
High charging and discharging capacity of up to 5kW per module
High storage density
Low weight and compact design
Absolutely maintenance-free and easy to install
The heart of the system – the Victron MultiPlus-II 48/5000
The Multiplus-II 48/5000/70-50 is a high-end device combination from Victron Energy (MPN: PMP482505010) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function.
Performance features and characteristics of the MultiPlus-II 48/5000
PowerControl and PowerAssist – increasing grid or generator power
Built-in anti-islanding function and connection option for an external current sensor (optional)
Can be used as a backup device in grid-connected systems for power supply during grid outages.
Usable in various ESS (Energy Storage System) applications
Ideally suited for professional marine applications, yachts, vehicles and land-based, off-grid applications.
VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration
Virtually unlimited power through parallel and three-phase operation
Technical data
5000 W power under non-linear load, 4000 W continuous load and 9000 W peak power
for 48V battery voltage, 50A transfer switch and 70A battery charger
Output voltage: 230 VAC, Frequency: 50 Hz
Maximum efficiency is 95%, protection class IP22
Maximum flexibility thanks to two AC outputs
The main output ensures uninterrupted operation. In the event of a power outage or interruption of shore/generator power, the MultiPlus-II takes over the supply of power to the connected devices. The switchover occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at the MultiPlus-II's input. Devices that must not drain the battery, such as a water heater, can be connected to this output.
Victron Energy Cerbo GX MK2 and GX Touch 50 – the communication hub of your system
The latest development in system monitoring from Cerbo allows you to effortlessly control and configure your system. Complemented by the GX Touch 50 – a waterproof 5-inch touchscreen – you always have a clear overview of your system parameters. Cerbo's features allow for perfect system control and monitoring, while simultaneously maximizing system performance in an unprecedentedly simple way.
Victron Energy has developed a new system monitor that allows for easy control and configuration. The GX Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. With the Cerbo module, you can precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-tied inverters. Mounting hardware and connection cables are included. The GX Touch 50's Bluetooth functionality makes accessing your system even faster and easier. An optional wall mount is available.